Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 120)

3-60 Operator Interface
7000A-UM151D-EN-P – March 2013 7000 “A” Frame
Figure 3.84 – Transfer Language Module
The screen will then ask you to confirm the operation. Press the [F8]
key to proceed, or the [F9] key to abort. If an attempt to download a
language module that already exists is made, the transfer will fail.
In order to download a newer version of a language, all languages
in the operator interface must first be cleared (this is a
characteristic of flash memory) by pressing the [F2] key on the
TRANSFER:LANGUAGE screen. The screen as in Figure 3.85
will then ask you to confirm the operation. Press the [F8] key to
proceed, or the [F9] key to abort.
Figure 3.85 – Clear Languages
Pressing the [F5] key may restart an aborted download or one that
failed. To select or enter a different filename, press the [F7] key.
System Programming The firmware for the complete drive system may be updated via
serial port #2 on the Customer Interface Board. Pressing the [F9]
key from the transfer screen will place the drive system into
download mode.