Upgrade firmware – Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual User Manual
Page 207
Advertising
Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
207
Upgrade the Drive Firmware
Appendix B
Upgrade Firmware
Follow these steps to select the drive module to upgrade.
1. In the Logix Designer application, from the Tools menu, choose
ControlFLASH.
The Welcome to ControlFLASH dialog box appears.
2. Click Next.
The Catalog Number dialog box appears.
TIP
You can also open ControlFLASH software by choosing
Start>Programs>FLASH Programming Tools>ControlFLASH.
Advertising