Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual - Manual (Page 55)

Rockwell Automation Publication 2198-UM001D-EN-P - May 2014 55
Mounting the Kinetix 5500 Drive System Chapter 3
This hole pattern applies when transitioning from frame 3 drives to frame 2
drives. To mount additional frame 2 drives to the right of Axis 2 in this figure,
refer to the frame 2 hole pattern in
Figure 23 .
Figure 27 - Frame 3 to Frame 2 Hole Pattern
273.70
(10.8)
0
52.50
(2.1)
0
6x
ØM4 (#8-32)
Axis 1
(frame 3)
Axis 2
(frame 2)
272.24
(10.7)
28.40
(1.1)
95.00
(3.7)
100.00
(3.9)
34.00
(1.3)
Dimensions are in mm (in.)