Ec declaration of conformity, Eu declaration of conformity – Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual User Manual
Page 230
230
Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
Appendix E
EC Certifications
EC Declaration of Conformity
For all declarations of conformity (DoC) currently available from
Rockwell Automation, go
.
Document Control Number: IMC-0040-D-EN
1 / 3
EU Declaration of Conformity
Identification of the product:
Kinetix 5500 Digital Servo Drives and Accessories
Name and address of the manufacturer:
Rockwell Automation, Inc.
6400 W. Enterprise Drive
Mequon, WI 53092
USA
Name and address of the authorised representative:
Rockwell Automation B.V.
Rivium Promenade 160
2909 LM Capelle aan den Ijssel
The Netherlands
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Object of the declaration:
Allen-Bradley Bulletin 2198
(reference the attached list of catalogue numbers)
The object of the declaration described above is in conformity with the relevant EU harmonisation legislation:
2006/95/EC
Low Voltage Directive
(LVD)
2004/108/EC
EMC Directive
(EMC)
2006/42/EC
Machinery Directive
(MD)
References to the relevant harmonised standards used or references to the specifications in relation to which
conformity is declared:
EN 61800-5-1:2007
Adjustable speed electrical power drive systems – Part 5-1: Safety
requirements – Electrical, thermal and energy.
EN 61800-5-2:2007
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements – Functional
EN 61800-3:2004
Adjustable speed electrical power drive systems – Part 3: EMC requirements
and specific test methods
EN 60204-1:2006+A1:2009
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
EN 60034-1:2010
Rotating electrical machines – Part 1: Rating and performance
IEC 61508: Part 1-7:2010
Functional safety of electrical/electronic/programmable electronic safety-
related systems
EN 62061:2005
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
EN ISO 13849-1:2008
Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
Notified Body:
TÜV Rheinland, Am Grauen Stein, 51105 Koln, (NB 0035)
performed:
EC Type Examination
and issued the certificate:
01/205/5255/12 (MD)
Additional information:
Year of CE Marking (LVD):
2012
Person authorised to compile the
technical file (MD):
Authorised representative (see details above).
Product Safety Function (MD):
Safe Torque-Off
Signed for and on behalf of the above named manufacturer:
Place and date of issue:
Mequon, WI USA
05-Feb-2014
Name, function:
Thomas Van Groll, Director Engineering
Signature: