Rockwell Automation MPMA Integrated Multi-Axis Linear Stages - Manual (Page 90)

90 Rockwell Automation Publication MPMA-UM001B-EN-P - November 2010
Appendix A Specifications and Dimensions
Table 23 - MPMA-xCBxxxxxx-xxx Product Dimensions
TL/2 TL/2
TU/2
TU/2
86.1
(3.39)
32.5
(1.28)
198
(7.8)
411.1
(16.18)
232
(9.13)
215.7
(8.49)
104.1
(4.10)
130.8
(5.15)
121.9
(4.80)
172.2
(6.78)
5.6 min
(0.22)
6.5 max
(0.26)
A
B
248.7
(9.79)
117.7
(4.63)
45.1
(1.77)
(4X) M8 X 1.25-6H 12.0 (0.47)
(4X) Ø 6.8 (0.27) 45.1 (1.77) Thru
93.9
(3.7)
25.4
(1.00)
Bumper Travel
See Detail A
25.4
(1.00)
Bumper Travel
Base
Secondary
0.025 / 300 x 300 (0.001 / 12.0 x 12.0)
Flatness requirement for assembly
mounting surface.
Dimensions are in mm (in.)
Quantity C
Mount to base using M6 x 1.0 hardware
at 120 mm spacing and the tee-nut bar
shipped with stacked stage.
Detail A
Ground Screw
(M5 x 0.8-6H)
(4X) M10 x 1.5-6H Thru (2 per end cap)
Access point for linear bearing
lubrication.
Secondary
(4X) 9/16-12 UNC Thru
(2 per end cap)
Access point for linear
bearing lubrication.
Base
Base
Position of secondary (Y) axis carriage at
center of travel of base (X) axis.
25.4
(1.00)
Bumper Travel
339
(13.3)
Carriage