Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 11)

Getting Started 2-1
C
HAPTER
2
Getting Started
This chapter provides:
• A description of the Interbus module components
• A list of parts shipped with the module
• A list of user-supplied parts required for installing the module
• An installation checklist
2.1 Interbus Module Components
™
Status Indicators Five LEDs that indicate the status of the
connected drive, module, and network.
Refer to chapter 8, Troubleshooting the
Interbus Module and Network, for more
information.
š
DPI Connector A 20-pin, single-row shrouded male
header. An Internal Interface cable is
connected to this connector and a
connector on the drive.
› Bus In Interbus
Connector One 6-pin plug-in connector.
œ Bus Out Interbus
Connector One 7-pin plug-in connector.
Figure 2.1 – Components of the Interbus Module
›
œ
c
š