Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 38)

5-8 Interbus Communications Module
.
Step 12. From the pull-down menu select Configuration/
Configuration Frame/Read In and answer Yes to changing
the operating state to Configuration Online. If there are
additional prompts, answer OK or Yes to perform the read
anyway. CMD will then read the bus configuration. (See
figure 5.11.)
The gray PCP icons represent each SP600 drive. The first SP600
drive has a Device Number of 1.0 and the second has a Device
Number of 2.0.
Figure 5.10 – Sample Interbus CMD Project
Figure 5.11 – CMD Bus Configuration
SP600 Interbus Demo
SP600 Interbus Demo