5 configuring the rslogix 500 sst interbus scanner – Rockwell Automation RECOMM-IBUS Interbus Communications Module User Manual
Page 46
Advertising
5-16
Interbus Communications Module
5.5
Configuring the RSLogix 500 SST
Interbus Scanner
The SST Interbus scanner is configured by clicking on the I/O
Configuration in RSLogix500. The SST-IBS-SLC scanner has an ID
Code of 13635. The settings in figures 5.19 and 5.20 are used by
the sample ladder logic program.
Figure 5.19 – Scanner I/O Configuration
Figure 5.20 – Scanner_G_Files
Advertising