Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 21)

Configuring the Interbus Module 4-1
C
HAPTER
4
Configuring the
Interbus Module
Chapter 4 provides instructions and information for setting the
parameters in the module.
For a list of parameters, refer to Appendix B, Interbus Module
Parameters. For definitions of terms in this chapter, refer to the
Glossary.
4.1 Configuration Tools
The Interbus module stores parameters and other information in its
own non-volatile memory. Therefore, you must access the module
to view and edit its parameters. Table 4.1 lists the tools that can be
used to access the module parameters.
Table 4.1 – Configuration Tools
Tool Refer to:
VS Utilities Software (version
1.01 or later)
VS Utilities online help
LCD OIM Section 4.2