Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 96)

B-4 Interbus Communications Module
I/O that is transferred through the module.
7 Reserved
Range: N/A
Default: N/A
Type: N/A
Reset Required: N/A
8 DPI I/O Config
Range: See figure B.1.
Default: See figure B.1.
Type: Read/Write
Reset Required: N/A
Figure B.1 – DPI I/O Config (8)
!
ATTENTION: If the module is transmitting I/O that
controls the drive, the drive may fault when you reset
the module. Determine how your drive will respond
before resetting a connected module. Failure to
observe this precaution could result in bodily injury
or damage to equipment.
0 0 0 1 0 x x x
0 1 2 3 4 5 6 7
1 = I/O Enabled
0 = I/O Disabled
x =Not Used
Cmd/Ref Datalink A Datalink B Datalink C Datalink D Not Used Not Used Not Used