Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 94)

B-2 Interbus Communications Module
Port to which the module is connected. This will usually be port 5.
Data rate used by the drive. This data rate is set in the drive and the
module detects it.
Size of the Reference/Feedback. The drive determines the size of
the Reference/Feedback.
Size of each Datalink word. The drive determines the size of
Datalinks.
1 DPI Port
Range: 0 to 7
Default: 0
Type: Read Only
Reset Required: N/A
2 DPI Data Rate
Range: 0 = 125 K
1 = 500 K
Default: 0 = 125 K
Type: Read Only
Reset Required: N/A
3 Ref/Fdbk Size
Range: 0 = 16-bit
1 = 32-bit
Default: 0 = 16-bit
Type: Read Only
Reset Required: N/A
4 Datalink Size
Range: 0 = 16-bit
1 = 32-bit
Default: 0 = 16-bit
Type: Read Only
Reset Required: N/A