Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 5)

Contents V
List of Figures
Figure 2.1 – Components of the Interbus Module....................................... 2-1
Figure 3.1 – Sample Network Wiring .......................................................... 3-3
Figure 3.2 – DPI Ports and Internal Interface Cables ................................ 3-4
Figure 3.1 – Mounting and Grounding the Interbus Module ....................... 3-5
Figure 4.1 – Accessing the Interbus Parameters using the LCD OIM ........ 4-2
Figure 4.2 – I/O Configuration Screen on an LCD OIM .............................. 4-2
Figure 4.3 – Fault Action Screen on an LCD OIM ...................................... 4-5
Figure 4.4 – Reset Module Screen on an LCD OIM ................................... 4-7
Figure 5.1 – Sample Interbus Network ....................................................... 5-2
Figure 5.2 – Creating a New Interbus Project using CMD .......................... 5-4
Figure 5.3 – Entering a Name for the New Interbus Project ....................... 5-4
Figure 5.4 – Entering a Name for the Interbus Controller ........................... 5-5
Figure 5.5 – Entering a Name for the Interbus Program............................. 5-5
Figure 5.6 – Sample Interbus CMD Project ................................................ 5-5
Figure 5.7 – Selecting the Port Communication Path ................................. 5-6
Figure 5.8 – Selecting the Interbus Controller Type ................................... 5-7
Figure 5.9 – Entering a Description for the Controller Board ...................... 5-7
Figure 5.10 – Sample Interbus CMD Project .............................................. 5-8
Figure 5.11 – CMD Bus Configuration ........................................................ 5-8
Figure 5.12 – Sample Interbus I/O Mapping ............................................... 5-9
Figure 5.13 – Scanner Mapping / SLC Addressing..................................... 5-9
Figure 5.14 – Entering a Station Name..................................................... 5-11
Figure 5.15 – Selecting Data for the Parameter Channel Screen............. 5-12
Figure 5.16 – Sample SP600 Demo #2 .................................................... 5-13
Figure 5.17 – Selecting Data for Parameterization/Execute Screen......... 5-14
Figure 5.18 – Sample Parameterization Execution................................... 5-14
Figure 5.19 – Scanner I/O Configuration .................................................. 5-16
Figure 5.20 – Scanner_G_Files ................................................................ 5-16
Figure 6.1 – Sample I/O Image with All I/O Enabled .................................. 6-2
Figure 6.2 – Sample I/O Image with Only Logic/Reference and
Datalink B Enabled ................................................................. 6-3
Figure 6.3 – Sample SLC Ladder Logic - Main Program ............................ 6-8
Figure 6.4 – Sample SLC Ladder Logic - Station 1 Program...................... 6-9
Figure 6.5 – Sample SLC Ladder Logic - Station 1 Program (Continued) 6-10
Figure 6.6 – Sample SLC Ladder Logic - Station 2 Program.................... 6-11
Figure 6.7 – Sample SLC Ladder Logic - Station 2 Program (Continued) 6-12