Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 18)

3-4 Interbus Communications Module
3.3 Connecting the Module to the Drive
Step 1. Remove power from the drive.
Step 2. Use static control precautions.
Step 3. Connect the Internal Interface cable to the DPI port on the
drive and then to the DPI connector on the module.
# Description
™
15.24 cm (6 in) Internal Interface cable
š
DPI Connector
›
Interbus Connectors
œ
2.54 cm (1 in) Internal Interface Cable
Figure 3.2 – DPI Ports and Internal Interface Cables
™
š
›
œ
Interbus Module
SP600 Drive
1-20 HP @ 460 VAC
SP600 Drive
25-40 HP @ 460 VAC