Rockwell Automation RECOMM-IBUS Interbus Communications Module User Manual
Page 43
Advertising
![background image](/manuals/581081/43/background.png)
Configuring the Interbus Scanner
5-13
Step 18. Right-click on the SST-IBS-SLC icon and select
Parameterization/Execute. Select “Startup without PDP”
as shown in figure 5.17, and click OK. This uses the
mapping already set up in the scanner and does not allow
re-mapping by the software tool.
Figure 5.16 – Sample SP600 Demo #2
SP600 Demo #1
SP600 Demo #2
Advertising