Rockwell Automation RECOMM-IBUS Interbus Communications Module - Manual (Page 34)

5-4 Interbus Communications Module
Step 2. Right-click on the Project icon and select
Description. Enter a name for the project and any
additional information desired, as shown in figure 5.3.
Click OK when complete.
Step 3. Right-click on the PLC/PC icon and select
Description. Enter a name for the controller and any
additional information desired, as shown in figure 5.4.
Click OK when complete.
Figure 5.2 – Creating a New Interbus Project using CMD
Figure 5.3 – Entering a Name for the New Interbus Project
SP600 Interbus Demo
An SP600 Interbus demonstration
program using an SLC-5/05
system with an SST-IBS-SLC
Interbus scanner.