Rockwell Automation MPAS Integrated Linear Stages - Manual (Page 103)

Rockwell Automation Publication MP-UM001D-EN-P - September 2013 103
Appendix
F
Mounting Bolts and Torque Values
This appendix provides typical torque values for standard and metric bolts.
Table 18 - Recommended Seating Torque for Metric Bolts
Topic Page
Recommended Seating Torque for Metric Bolts 103
Recommended Seating Torque for Mild Steel Rb 87 or Cast Iron Rb 83 104
Recommended Seating Torque for Brass Rb 72 105
Recommended Seating Torque for Aluminum Rb 72 (2024-T4) 106
Bolt Size (Metric)
(1)
Pitch Plain Cadmium Plated Zinc
N•m (lb•in.) N•m (lb•in.) N•m (lb•in.)
M1.6
(2)
0.35 0.29 (2.6) 0.22 (1.95) 0.41(3.64)
M2
(2)
0.40 0.60 (5.3) 0.45 (3.98) 0.84 (7.42)
M2.5
(2)
0.45 1.24 (11) 0.93 (8.25) 1.74 (15.4)
M3 0.5 2.15 (19) 1.61 (14.25) 3.00 (26.6)
M4 0.7 4.6 (41) 3.47 (30.75) 6.48 (57.4)
M5 0.8 9.6 (85) 7.20 (63.75) 13.4 (119)
M6 1.0 15.8 (140) 11.9 (105) 22.1 (196)
M8 1.25 39.5 (350) 29.7 (262.5) 55.4 (490)
M10 1.5 76.8 (680) 57.6 (510) 115.2 (1020)
(1) Mounting hardware is ISO 898/1 socket head cap bolt that meets or exceeds ANSI B113M, ISO 261, ISO 262 (only coarse series).
(2) Microsize bolt.