Rockwell Automation MPAS Integrated Linear Stages - Manual (Page 32)

32 Rockwell Automation Publication MP-UM001D-EN-P - September 2013
Chapter 4 Mounting and Connecting
Figure 8 - Through Bolt Mounting
An uncovered linear stage is a good candidate for through bolt mounting.
Figure 9 - Toe Clip Mounting
For covered linear stages, toe clips are the easiest method for mounting. On both
sides of the base, secure a toe clip every 120 mm (4.72 in.) with a M6 SHCS as
shown in Figure 9. Use the slots formed into the outside edge of the linear stage
base.
IMPORTANT Through bolt mounting is not available for the catalog number MPAS-
x6xxxx-xxxxx (150 mm) stages.
120 mm
(4.72 in.)