Rockwell Automation MPAS Integrated Linear Stages - Manual (Page 61)

Rockwell Automation Publication MP-UM001D-EN-P - September 2013 61
Chapter
8
Removing and Replacing Components
Before You Begin Assemble these tools before you begin removal and replacement procedures.
• 2.5 mm, 3 mm, 4 mm, 5 mm, and 6mm hex keys
• 0.8 mm (0.03 in) shim
• Fine-point permanent marker
• Ruler
• Tin snips
• Loctite 222
• Phillips and flat-blade screwdrivers
Topic Page
Before You Begin 61
Cable Carrier Assembly Removal 62
Cable Carrier Assembly Installation 62
Strip Seal Removal 63
Cover Removal 64
Cover Installation 64
Strip Seal Replacement 64
Side Cover Installation 65
Rotary Motor Replacement 66
ATTENTION: Lockout and tagout input power before servicing.
ATTENTION: These procedures are not applicable to both types of linear stages.
Direct drive and ball screw linear stages have unique configurations