Rockwell Automation MD65 Profibus Communication Card - Manual (Page 31)

Configuring the PROFIBUS Module 4-3
4.3 Using V*S Utilities via MDCOMM-232
V*S Utilities can be used to access parameters in the module. Use
V*S Utilities (version 4.0) and the MDCOMM-232 (version 2.001 or
higher). For more information on V*S Utilities, see instruction
manual D2-3488.
Step 1. Connect the MDCOMM-232 to the MD65 and to a PC
serial COM port, then apply power to the MD65 drive.
Step 2. Open V*S Utilities and press the “Connect Serial” button
in the toolbar. In the left window under “Devices,” “Node 1:
MD65” appears. There are three configurable devices: the
MD65, the Profibus module and the serial module
MDCOMM-232.
4. Press Enter to select
the Profibus module.
The Parameters menu
for the module will be
displayed.
5. Press Enter to access
the parameters. Edit
the module parameters
using the same
techniques that you
use to edit parameters.
Table 4.2 – Using the LCD OIM or CopyCat Keypad
Step Key(s) Example Screens
Parameters
Linear List
Changed Params
DIAG PARAM DSEL MEM SEL X
Mode RO
Parameter: # 001
Single Drive 0
VALUE LIMITS SEL X
Figure 4.1 – Using V*S Utilities