Rockwell Automation MD65 Profibus Communication Card - Manual (Page 46)

5-10 PROFIBUS Communications Module
Step 12. Click Add to continue adding modules. Select “Parameter
Access” and click OK.
Step 13. The “Parameter Access” module has now been added as
shown in figure 5.15.
Settings can be chosen to map Station models to SLC addresses.
In our example M1/Mo files are used for Input / Output.
Note that the Reference/Feedback (Ctrl/Stat & Ref/Fdbk) start at
word 0.
Figure 5.14 – Add Modules: Parameter Access Selection Window
Figure 5.15 – Modules: Parameter Access Viewing Window