Rockwell Automation MD65 Profibus Communication Card - Manual (Page 64)

8-4 PROFIBUS Communications Module
8.2 System Wiring
To daisy-chain the drives of the MD65 with the MDCOMM-PBUS
module (Drive 0), the AK-U0-RJ45-TB2P terminal block connector
(Figure 8.4) can be used for easy installation.
The wiring diagram for using AK-U0-RJ45-TB2P terminal block
connectors is shown in figure 8.5.
The AK-U0-RJ45-TB2P comes with five (5) terminal block
connectors and two (2) terminating resistors.
Figure 8.4 – AK-U0-RJ45-TB2P Terminal Block Connector
Figure 8.5 – Multi-Drive Mode Example for Network
To
MD65 with
MDCOMM-PBUS
To
Drive #2
To
Drive #3
To
Drive #4
To
Drive #5
120 Ω
¼ Watt
Resistor
120 Ω
¼ Watt
Resistor