Rockwell Automation MD65 Profibus Communication Card User Manual
Page 47
Advertising
Configuring the PROFIBUS Scanner
5-11
Step 14. Click on the SLC Address tab as shown in figure 5.16.
Step 15. Parameter Access starts at word 10 in the M1/M0 files.
Note that Parameter Access utilizes 4 words. Click OK
when finished.
Step 16. Station 1 is now displayed in the network window.
Figure 5.16 – SLC Address: M1/M0 (Ctrl/Stat & Ref/Fdbk)
Figure 5.17 – SLC Address: M1/M0 (Parameter Access)
Figure 5.18 – Station 1 Network Window
Advertising