Rockwell Automation MD65 Profibus Communication Card - Manual (Page 5)

Contents III
List of Figures
Figure 2.1 – Components of the PROFIBUS Module ................................. 2-1
Figure 2.2 – Status Indicators ..................................................................... 2-5
Figure 3.1 – Setting the Node Address....................................................... 3-2
Figure 3.2 – ERNI and Phoenix Subcon Connectors.................................. 3-5
Figure 3.3 – Network Wiring Diagram......................................................... 3-5
Figure 3.4 – Optional Clamp-On Ferrite Cable Clamp................................ 3-6
Figure 3.5 – Connection for Terminating Resistors .................................... 3-7
Figure 3.6 – MDI Ports and Internal Interface Cables................................. 3-9
Figure 3.7 – Mounting the Adapter ........................................................... 3-10
Figure 4.1 – Using V*S Utilities................................................................... 4-3
Figure 4.2 – Setting the Node Address....................................................... 4-4
Figure 4.3 – Fault Action Screens on an LCD OIM..................................... 4-6
Figure 4.4 – Reset Screen on an LCD OIM ................................................ 4-8
Figure 5.1 – Example PROFIBUS Network ................................................ 5-2
Figure 5.2 – SST PROFIBUS Configuration Software Tool........................ 5-2
Figure 5.3 – Standard Data Files ................................................................ 5-3
Figure 5.4 – Add PROFIBUS Devices Applet Window ............................... 5-4
Figure 5.5 – Adding the GSD File for the RECOMM-PBUS ....................... 5-4
Figure 5.6 – Masters/Slaves Library Window ............................................. 5-5
Figure 5.7 – SST-SST-PFB-SLC Master (General) Dialog Box.................. 5-6
Figure 5.8 – Scan Cycle Times Dialog Box ................................................ 5-6
Figure 5.9 – COM Port Default Settings ..................................................... 5-7
Figure 5.10 – Scanner Network Window .................................................... 5-7
Figure 5.11 – Reliance Electric Library Dialog Window .............................. 5-8
Figure 5.12 – Available Modules: Ctrl/Stat & Ref/Fdbk (2x2Bytes)
Window ................................................................................ 5-8
Figure 5.13 – Modules: Ctrl/Stat & Ref/Fdbk Viewing Window................... 5-9
Figure 5.14 – Add Modules: Parameter Access Selection Window.......... 5-10
Figure 5.15 – Modules: Parameter Access Viewing Window ................... 5-10
Figure 5.16 – SLC Address: M1/M0 (Ctrl/Stat & Ref/Fdbk) ...................... 5-11
Figure 5.17 – SLC Address: M1/M0 (Parameter Access)......................... 5-11
Figure 5.18 – Station 1 Network Window.................................................. 5-11
Figure 5.19 – Station 2 Network Window.................................................. 5-12
Figure 5.20 – Network Window Scanner Selection................................... 5-13
Figure 5.21 – Save As Dialog Window ..................................................... 5-13
Figure 6.1 – Single Drive Example of I/O Image......................................... 6-2
Figure 7.1 – Explicit Message Process....................................................... 7-2
Figure 7.2 – Parameter Message Format ................................................... 7-3