Rockwell Automation MD65 Profibus Communication Card - Manual (Page 73)

Troubleshooting the PROFIBUS Module and Network 9-5
9.2 Module Diagnostic Items in Single
Drive Mode
Table 9.4 lists diagnostic items that can be accessed using
V*S Utilities software or the LCD OIM.
9.3 Module Diagnostic Items in Multi-
Drive Mode
For the Multi-Drive mode it is not possible to connect a peripheral
device such as an OIM or MDCOMM-232 (V*S Utilities). Table 9.5
lists diagnostic items that can only be accessed via Profibus
network in Multi-Drive mode.
Table 9.4 – Module Diagnostic Items for Single Drive Mode
No. Event Description
1 Field Flash Cnt The number of Firmware Updates.
2 Module Events The number of events in the event queue.
3 Reference Reference from PROFIBUS returned to MDI drive.
4 Logic Cmd Command from PROFIBUS returned to MDI drive.
5 Logic Sts Status of the drive returned to PROFIBUS.
6 Feedback Feedback from drive returned to PROFIBUS.
7 PROFIBUS Rx
Errors Current value of the PROFIBUS Receive Error
Counter register.
8 PROFIBUS Tx
Errors Current value of the PROFIBUS Transmit Error
Counter register.
9 Data Rate Current setting of the PROFIBUS baud rate.
10 Node Address Current setting of the module Node address switch.
Table 9.5 – Module Diagnostic Items for Multi-Drive Mode
No. Event Description
1 Field Flash Cnt The number of Firmware Updates.
2 Module Events The number of events in the event queue.
3 Drv 0 Reference Reference from Profibus returned to MDI Drive 0.
4 Drv 0 Logic Cmd Command from Profibus returned to MDI Drive 0.
5 Drv 0 Logic Sts Status of the Drive 0 returned to Profibus.
6 Drv 0 Feedback Feedback from Drive 0 returned to Profibus
7 Drv 1 Reference Reference from Profibus returned to MDI Drives 0-1.
8 Drv 1 Logic Cmd Command from Profibus returned to MDI Drive s0-1.
9 Drv 1 Logic Sts Status of the Drives 0-1 returned to Profibus.