Rockwell Automation Energy Management Accelerator Toolkit Quick Start User Manual
Page 149
Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
149
FactoryTalk EnergyMetrix Software Meter and Tag Setup Chapter 7
The tag just entered should
appear on the Meter Setup
tab.
For this example, you should
see these tags.
14.
Click the Meter Data tab to verify that the meter data
is being logged.
The data will not appear until the next logging
interval has occurred.
Another way to check the data is to return to the
Meter Setup tab and click the Read device tags link
just above the list of meter tags.
You can click Current Date/Time to refresh the data.
15.
Repeat steps 1…14 to assign other energy meter tags to L2x analog or digital inputs.
Refer to the Energy Data Worksheet for the appropriate meter tag names.
example, you will assign meter tags to the Fuel Oil, Propane, and Steam Flow
meters by using the information in the table.
Meter Name
Meter Tag Name
Value Type
Address
Tag Format
Roller value
Fuel Oil Meter
Fuel Oil Usage
Fuel Oil Usage
F10:1
32-bit Floating Point
10,000,000
Propane Meter
Propane Usage
Propane Usage
F10:2
32-bit Floating Point
10,000,000
Steam Flow Meter
Steam Usage
Steam Usage
F10:3
32-bit Floating Point
10,000,000