Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 251)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 251
FactoryTalk View ME Energy Faceplates Chapter 11
8. Enter the DataLink Module Definitions exactly as shown for your specific PowerFlex drive.
For the PowerFlex 750 drives, in addition to configuring datalinks, verify that Use Network Reference is checked.
9. Click OK to accept the changes.
10. Click OK again to close the dialog box.
IMPORTANT The datalinks listed must be configured exactly as shown for successful faceplate AOI import and operation. If additional datalinks
are required for your application, modifications to the corresponding AOIs are required. See
Set Other PowerFlex Drive Parameters
for more information.
PowerFlex 70, 70EC, 700, & 700H
Datalinks PowerFlex 700S & 700S 2P Datalinks
PowerFlex 753 Datalinks
PowerFlex 755 Datalinks
IMPORTANT If you create multiple PowerFlex Module Definitions for the same type of drive (PF 70) with unique datalink definitions, you also
have to create unique AOIs with unique names for those modules.