Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 258)

258 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
4. When the drive download successfully completes, the drive status indicates ‘Connected’, highlighted in green.
Import Program Control Rungs
Example logic is provided for configuring program commands. To import this configuration, follow these steps.
1. Choose a routine for importing the new rungs.
2. On a new rung, right click and select ‘Import Rungs’
3. From the Basic PowerFlex Control folder, select ‘PowerFlex_Control_Rungs.L5X’ and click Import.
4. Click Tags in the Import Content organizer.
5. Replace ‘_DriveName’ in the Final Name field with the name of your PowerFlex module and click OK.
6. Select Add-On Instructions in the Import Content organizer.
7. Discard the import of the PFlex_70_AOI (this AOI was used to create the rung import file, but is needed, because
the existing AOI for your PowerFlex drive is used).