Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 351)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 351
FactoryTalk View ME Energy Faceplates Chapter 11
2. Create two FactoryTalk View device
tags used by the preconfigured alarm
triggers.
• EnergyAlarmTrigger - Analog tag
set to a maximum of 200
• EnergyAlarmName- String tag
3. Assign the data source of each tag to
the EnergyAlarmTrigger and
EnergyAlarmName controller tags that
you configured in RSLogix 5000
software.
Alarm History Faceplate/AOI
If you choose to display the kW High Limit alarm and Communication alarm, you need to create two FactoryTalk View
device tags and customize two alarm messages:
• ‘ModuleAlarmTrigger’ – Analog tag (Set max to 200 for each)
• ‘ModuleAlarmName’- String tag
1. Assign each tag to the associated controller tag that was created when you imported the CIP Motion Energy
faceplate routine.
2. Customize two alarm messages.
[L2x]EnergyAlarmTrigger
[L2x]EnergyAlarmTrigger