Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 370)

370 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 12 Demand Control
5. Click the ellipse icon next to Display:, select the
ME_Demand_Faceplate, and then click OK.
6. Click on the Label tab and enter a caption, such as ‘Demand
Controller’.
7. Click OK to close the Goto Display push button Properties
dialog box.
If you do not already have a Shutdown or Goto Configure Mode
button configured in your application, you should add one to the
main page as well.
This will provide a means of shutting down your application.
8. From the Objects > Advanced menu select Goto Configure
Mode or Shutdown.
9. Draw the button on your display and configure its properties.
10. Save your display.
Configure Alarms
1. Expand the Alarms folder in the system tree.
2. Right-click Alarm Setup and choose Import and Export.
3. Select Import alarm configuration into application.
4. Click Next.