Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 248)

248 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
Configure ME PowerFlex Drives Faceplates
The ME PowerFlex® Faceplates files let you quickly load, configure, and use preconfigured status, control, and diagnostic
displays or ‘faceplates’ for the PowerFlex family of drives using RSView Machine Edition software.
These instructions are for PowerFlex drives communicating over the EtherNet/IP network only.
Shows status and provides operator control of the drive.
Shows the last fault.
Press Next Pen to shift between the voltage, current, and speed trends. Lets you set the minimum and maximum values of the trend scale.
Home Display Fault Display
Configuration Display
Energy Display
Trend Configuration Display Trend Display
Lets you set the communication fault time, the accel/decel times,
and rename the device for display at the top of the faceplate. Shows basic energy data.