Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 181)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 181
FactoryTalk EnergyMetrix Software Reports and Charts Chapter 9
10. Verify the report is selected.
11. Accept PDF as the Export type.
12. Select the report parameters.
a. Select the time zone.
b. Select a predefined or custom time
span. For this example, select
Previous Month.
c. Check Suppress meter details to list
only group totals in the report.
This is useful when percentages of
meters are allocated to groups.
13. Click View.
The report is generated and opened in
a new browser window.
14. To print or save the report to the output file, use the menu commands in the browser.
15. Refer to Create a Job to Run Report Automatically on page 179 for details on how to configure a report job to
automatically run the report.
TIP If the new browser window does not open, make sure the browser pop-up blocker is not active.