Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 414)

414 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 13 Time of Day Control
10. Click the holiday button and enter the desired holiday schedule.
11. Place the load in TOD Control mode.
To change the mode, click on the mode indicator to toggle between TOD
Control, Override On, and Override Off.
12. Click Save Day Changes to confirm your mode selection.
13. Verify that the load turns on and off per the configured schedule.
14. Repeat the above steps for each load in your application.