Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 345)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 345
FactoryTalk View ME Energy Faceplates Chapter 11
In this example, preconfigured logic in the Energy_Gas_AOI writes values to Sts_Value1 and Sts_Value2. Two additional
MOV instructions were added to this rung to display high flow and critical flow values on the Equipment Status Faceplate.
You can do the same for units displayed with additional value fields. Write logic to move a string value to the
SetValue
xUnits tag in the Add-On Instruction, or set the default string for this tag by:
• opening the Controller Tags browser,
• changing the scope to your Add-On Instruction,
• editing the Set_Value
xUnits default field.
In this example, High Flow and Critical Flow are added to Set_Value3Unit and Set_Value4Unit tags.