Introduction, Before you begin, What you need – Rockwell Automation 1768-L43 CompactLogix System Quick Start User Manual
Page 101: Create a project in rslogix 5000, Chapter 9, Introduction before you begin what you need
Advertising
101
Publication IASIMP-QS003B-EN-P - October 2009
101
Chapter
9
Create a Project in RSLogix 5000 Programming Software
Introduction
In this chapter, you create a project in RSLogix 5000 programming software. In the project,
you use ladder logic to create a push button that controls a light on a digital output module.
This project is used in subsequent chapters to test communication with other devices.
Before You Begin
•
Assemble the CompactLogix hardware (
•
Prepare the computer and verify that RSLogix 5000 software is installed (
).
•
Configure your network.
– EtherNet/IP network (
)
– DeviceNet network (
What You Need
•
CompactLogix I/O modules needed for your application. This example uses a
1769-OB16 module.
Advertising