Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 129)

Publication IASIMP-QS003B-EN-P - October 2009 129
Add Distributed Point I/O Modules to the Project Chapter 10
5. Right-click the Light and
select New ‘xxxx_Light’.
6. In the Type field, select
Alias.
7. In the Alias For field,
browse for the recorded
address below.
8. Click OK.
For EtherNet/IP, skip to
page 135 .
For Select this Address Example From
EtherNet/IP _______
:O.Data[
__
].
__ Point_IO_Enet_Adapter:
O.Data[0].0 step 11 on page 119
adapter
name
output
module
slot #
any
bit