Configure the, Ethernet/ip, Driver in rslinx – Rockwell Automation 1768-L43 CompactLogix System Quick Start User Manual
Page 48: Software
Advertising
![background image](/manuals/581614/48/background.png)
48
Publication IASIMP-QS003B-EN-P - October 2009
Chapter 2 Prepare the Computer and Load Controller Firmware
Configure the EtherNet/IP Driver in RSLinx Software
Required for 1768-L43, 1768-L45, and PanelView Plus
1. If RSLinx software is not open, launch RSLinx software.
2.
From the Communications
menu, choose Configure
Drivers.
3. From the Available
Driver Types, select
Ethernet/IP Driver.
4. Click Add New.
5. Click OK to keep the default
name.
6. Click OK to Browse Local
Subnet.
Advertising