Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 144)

144 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 11 Create a PowerFlex 70 Application
4. From the Parameter
Group pull-down list,
select Communication
>Datalinks.
5. Verify that parameters
300 through 317 are set
to 0.
6. Click Close, then OK.
The parameters are
loaded to the drive.
For EtherNet/IP
systems, skip to
page 153 , Test the
PowerFlex 70 Tags.