Prepare the powerflex 70 drive, Introduction, Before you begin – Rockwell Automation 1768-L43 CompactLogix System Quick Start User Manual
Page 61: What you need, Prepare the, Powerflex 70 drive, Chapter 4, Introduction before you begin what you need
Advertising
![background image](/manuals/581614/61/background.png)
61
Publication IASIMP-QS003B-EN-P - October 2009
61
Chapter
4
Prepare the PowerFlex 70 Drive
Introduction
In this chapter, you mount and wire power to a PowerFlex 70 drive. You also configure the
communication adapter and make network connections.
Before You Begin
•
Assemble your CompactLogix hardware (
).
•
Determine which network adapter to use on the PowerFlex 70 drive:
– For an EtherNet/IP network (option 1), use the 20-COMM-E adapter.
– For a DeviceNet network (option 2), use the 20-COMM-D adapter.
What You Need
•
PowerFlex 70 drive
•
PowerFlex 70 communication adapter
– 20-COMM-E for an EtherNet/IP network (option 1)
– 20-COMM-D for a DeviceNet network (option 2)
•
Standard CAT5 Ethernet cable for EtherNet/IP system (option 1)
Advertising