Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 155)

Publication IASIMP-QS003B-EN-P - October 2009 155
Create a PowerFlex 70 Application Chapter 11
10. Change the Stop tag
to 1.
The display on the drive
will show a speed
decrease until the drive
reaches
0.00 Hz.
11. Change the Stop tag back
to 0.
12. Go Offline and save.
By starting and stopping the drive, you verified:
• the controller is correctly communicating with the drive.
• the drive can receive simple commands.
If you are using an EtherNet/IP network, you are done configuring the PowerFlex 70 drive.