Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 67)

Publication IASIMP-QS003B-EN-P - October 2009 67
Prepare the PowerFlex 70 Drive Chapter 4
20-COMM-E EtherNet/IP Adapter for EtherNet/IP System
1. Connect the flat-ribbon
cable between the adapter
and the PowerFlex 70
drive.
2. Fold the cable under the
adapter without creasing
and secure the adapter on
the drive using the captive
screws.
3. Remove a knockout from
the bottom plate on the
drive route the Ethernet
cable through the hole.
4. Connect a CAT5
Ethernet cable between
the Ethernet adapter and
the Ethernet switch.
5. Replace drive cover.