Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 158)

158 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 11 Create a PowerFlex 70 Application
8. Change the O.Start tag to
1.
The display on the drive
registers the speed
increase in Hz until the
value at the reference tag
is reached.
9. Change the O.Start tag
back to 0.
10. Change the O.Stop tag to
1.
The display on the drive
shows a speed decrease
until the drive reaches
0.00 Hz.
11. Change the O.Stop tag
back to 0.
12. Go Offline and save.
WARNING
If there is a motor attached to your drive, completing the next step will cause it to turn.