Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 122)

122 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 10 Add Distributed Point I/O Modules to the Project
9. Click the Device Bridging
tab.
10. Click Associate File.
11. Select the DeviceNet.dnt
configuration file. Click
Open.
12. Click Apply, then OK.
13. Click Save.
14. Enter a File name that
identifies this file as the
subnet and click Save.
This name must be
different than the
DeviceNet.dnt
configuration file you
created in
Chapter 8 .