Edit the drive parameters, Edit the drive, Parameters – Rockwell Automation 1768-L43 CompactLogix System Quick Start User Manual
Page 143: Required for ethernet/ip system
Advertising
Publication IASIMP-QS003B-EN-P - October 2009
143
Create a PowerFlex 70 Application Chapter 11
Edit the Drive Parameters
Required for EtherNet/IP System
1. Double-click the
Parameter List.
2. Enter the following
parameters:
3. Click OK.
The parameters are
loaded to the drive.
Parameter
Name
Value
Parameter 61
Autotune
Ready
Parameter 90
Speed Ref A Sel
DPI Port 5
Parameter 361
Digital In1 Sel
Not Used
Parameter 362
Digital In2 Sel
Not Used
Parameter 363
Digital In3 Sel
Not Used
Parameter 364
Digital In4 Sel
Not Used
Parameter 365
Digital In5 Sel
Not Used
Parameter 366
Digital In6 Sel
Not Used
Advertising