Rockwell Automation 1768-L43 CompactLogix System Quick Start - Manual (Page 137)

137 Publication IASIMP-QS003B-EN-P - October 2009 137
Chapter
11
Create a PowerFlex 70 Application
Introduction
In this chapter, you configure a PowerFlex 70 drive and add the drive to your RSLogix 5000
project. You also download the project to the controller so you can test communication with
the drive.
Before You Begin
• Assemble the CompactLogix hardware ( Chapter 1 ).
•
Prepare the computer ( Chapter 2 ).
• Prepare the PowerFlex 70 drive and network adapter ( Chapter 4 ).
• Configure your network ( Chapter 7 or 8 ).
• Create a project in RSLogix 5000 software ( Chapter 9 ).
What You Need
• For a DeviceNet network (option 2), RSNetWorx for DeviceNet software.
• For an EtherNet/IP network (option 1), no additional software is needed.