Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 115)

Publication IASIMP-QS015C-EN-P - August 2011 115
FactoryTalk View Integration Chapter 6
Add ArmorStart Device Faceplates
The ME ArmorStart Faceplate files let you quickly load, configure, and use pre-configured status, control,
and diagnostic displays or faceplates for the ArmorStart family of devices using FactoryTalk View Machine
Edition.
This example shows a ArmorStart device object that may be added to your specific hardware system display.
The object is a pre-configured Goto display button that can launch the on-top display or faceplate for the
particular ArmorStart device it represents. The faceplate includes status, control, and diagnostic views
controlled by its own toolbar buttons.
Goto Button Display Launching a ArmorStart Faceplate
TIP
If you are creating a new FactoryTalk View Studio application, refer to FactoryTalk View Application
Configuration , beginning on page 175 , before proceeding with this section.
Goto Display Button
Status and Control
Diagnostic Info
Speed Trending
Diagnostic Info