Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 16)

16 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 1 Hardware Selection
The ControlLogix Chassis Preference dialog
box appears.
8. Select the appropriate settings.
For this example, 4 is the preferred size.
9. Click Next until the Networks dialog box
appears.
10. Enter the number of EtherNet/IP and
DeviceNet networks.
For this example, enter 1 for EtherNet/IP
and 1 for DeviceNet.
11. Click Next.
12. Check ‘Click here to manually choose
Logix processor(s)’.
13. Select 1756-L63 as the processor.
14. Click Finish.