Chapter 4, Armorstart local control configuration, Before you begin – Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit User Manual
Page 75: What you need
Publication IASIMP-QS015C-EN-P - August 2011
75
Chapter
4
ArmorStart Local Control Configuration
In this chapter, you will configure your ArmorStart device for standalone or device level control.
DeviceLogix devices have built-in processing capabilities that include controlled shutdowns in the event of
network loss, or a controlled continuation of the process. It reduces the sense-to-actuation time, resulting in
higher performance and simpler programming.
Before You Begin
• Complete your system hardware selection (refer to
).
• Complete your system layout and wiring (refer to
).
• Configure your ArmorStart device (refer to
).
What You Need
• RSNetWorx for DeviceNet software, version 9.0 or later.
• The manual for how to program the DeviceLogix device. Refer to
page 11
publication numbers.