Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 156)

156 Publication IASIMP-QS015C-EN-P - August 2011
Appendix A Logix Communication and Controller Configuration
Verify Your IP Address
1. From the Start menu, choose Run.
The Run dialog box opens.
2. From the Open pull-down menu, choose
cmd.
3. Click OK.
The Windows IP Configuration dialog box opens.
4. Enter ipconfig at the prompt.
5. Press Enter.
6. Verify that the IP address and
Subnet Mask match what you
entered.
If these numbers do not match what
you entered, contact your network
administrator.
7. Close the cmd.exe window.