Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 132)

132 Publication IASIMP-QS015C-EN-P - August 2011
Chapter 6 FactoryTalk View Integration
Create a Goto Display Button to Launch the Equipment Faceplate
1. Add a Goto Display button on one of your existing ME displays.
2. Double-click the button to open its Properties.
3. Under Display Settings, set the Display to
Equipment_Status_Faceplate and the Parameter file
to ME_Equipment_Parameter.
4. Save and test your application by creating a runtime application.
TIP
To add devices that do not have pre-configured faceplates and add views to the Equipment Status
Faceplate, refer Add Equipment Status Faceplate beginning on page 124 .