Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 176)

176
Appendix B
Configure Runtime (Target) Communication
The target tab displays the offline configuration from the perspective of the device that will be running the
application and comprises the topology that will be loaded into a PanelView Plus or PanelView Plus CE
terminal.
Follow these steps to copy the configuration from Design time to Runtime.
1. Click Copy from Design to Runtime.
2. Click Yes.
3. Click Verify to make sure communication
is setup correctly.
The Shortcut Verifier dialog box appears.
4. Verify that the path to the Design device
and the Runtime device are assigned.
5. Click Close.
6. Click OK.